| Last Modified: 11-29-2007 | 1.6 G | |
| Service Category: Engine/Hybrid System | Section: Engine Control | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000031WW009X |
| Title: 3UR-FE ENGINE CONTROL: ACCELERATOR PEDAL: ON-VEHICLE INSPECTION (2008 Sequoia) | ||
ON-VEHICLE INSPECTION
1. INSPECT ACCELERATOR PEDAL SENSOR ASSEMBLY
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream main switch on.
(d) Enter the following menus: Powertrain / Engine and ECT / Data List / ETCS / Accelerator Position No. 1 and Accelerator Position No. 2.
(e) Read the value displayed on the Techstream.
Standard Voltage:
|
Accelerator Pedal Operation |
Accelerator Position No. 1 |
Accelerator Position No. 2 |
|---|---|---|
|
Released |
0.5 to 1.1 V |
1.2 to 2.0 V |
|
Depressed |
2.6 to 4.5 V |
3.4 to 4.7 V |
If the result is not as specified, check the accelerator pedal sensor assembly, wire harness and ECM.
|
|